Defining Mstp Interface Settings - Cisco SF500-24 Administration Manual

Configuring the Spanning Tree Protocol

Defining MSTP Interface Settings

STEP 3
Defining MSTP Interface Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco 500 Series Stackable Managed Switch Administration Guide
Click Apply. The MST Instance configuration is defined, and the Running
Configuration file is updated.
MSTP Interface Settings
The
settings for every MST instance, and to view information that has currently been
learned by the protocol, such as the designated bridge per MST instance.
To configure the ports in an MST instance:
Click Spanning Tree > MSTP Interface Settings. The
page is displayed.
Enter the parameters.
• Instance equals To—Select the MSTP instance to be configured.
• Interface Type equals to—Select whether to display the list of ports or
LAGs.
Click Go. The MSTP parameters for the interfaces on the instance are displayed.
Select an interface, and click Edit. The
displayed.
Enter the parameters.
• Instance ID—Select the MST instance to be configured.
• Interface—Select the interface for which the MSTI settings are to be
defined.
• Interface Priority—Set the port priority for the specified interface and MST
instance.
• Path Cost—Set the port contribution to the root path cost or use the default
value.
• Port State—Displays the MSTP status of the specific port on a specific MST
instance. The parameters are defined as:
Disabled
- —STP is currently disabled.
page enables you to configure the port MSTP
Edit MSTP Interface Settings
14
MSTP Interface Settings
page is
247