Locking Out Channels Or Frequencies; Locking Out Channels; Reviewing The Lock-Out Channels; Locking Out Frequencies - Radio Shack PRO-92 Owner's Manual

20-522b.fm Page 41 Thursday, September 7, 2000 9:41 AM
LOCKING OUT CHANNELS OR
FREQUENCIES
You can scan existing channels or search frequencies
faster by locking out channels or frequencies that have a
continuous transmission, such as a weather channel.

Locking Out Channels

To lock out a channel while scanning, press
the scanner stops on the channel. To lock out a channel
manually, select the channel then press
appears.
Notes:
• You can still manually select locked-out channels.
• If you lock out a channel that is set to a Motorola
trunking mode while using the subaudible decoding
mode, you can remove the lockout by removing
then reapplying power to the scanner. This makes it
easy to temporarily lock out trunking data channels.
To remove the lockout from a channel, manually select
the channel and press
L/OUT

Reviewing the Lock-Out Channels

To review all channels that are locked out, press
, then repeatedly press
AL
locked-out channel. When you finish reviewing locked-
out channels, press
MANUAL

Locking Out Frequencies

To lock out a frequency during a search, press
when the scanner stops on the frequency. The scanner
locks out the frequency, then continues searching.
Notes:
• The scanner does not store locked out frequencies
during a search.
Special Features
L/OUT
until
L/OUT
until L disappears.
MANU-
then to view each
FUNC L/OUT
.
L/OUT
when
L
41