Manually Changing A Search Range; Scanning The Channels - Radio Shack PRO-92 Owner's Manual

20-522b.fm Page 37 Thursday, September 7, 2000 9:41 AM
Note: After you press
seconds. Otherwise, begin over at Step 1.
4. Press or to select the preprogrammed search
range.
5. Press to replace the search range, then
ENTER
press to begin searching.
SEARCH

Manually Changing a Search Range

1. Press then
FUNC SEARCH
mode. PSR and a search bank number appear at
the display's upper left corner.
2. Press or to select the search bank number.
3. Use the number keys to enter the lower range you
want to search and store, then press
the frequency.
4. Use the number keys to enter the higher range you
want to search and store, then press
to store the frequency.
Notes:
• If you enter a higher frequency first then enter a
lower frequency, the scanner automatically
exchanges the frequencies on the display. It dis-
plays the lower frequency first and the higher fre-
quency second.
• You cannot span across frequency bands. When
manually setting search ranges, if you enter fre-
quencies on different bands, the scanner does
not accept the entry.
5. To assign a new name to the search range, press
twice then enter the name. If you want to edit
TEXT
existing text, repeatedly press
cursor across the text. Enter the appropriate text
and press , then press
ENTER
searching.

SCANNING THE CHANNELS

To begin scanning channels or to start scanning again
after monitoring a specific channel, press
, press within about 3
FUNC 5
to enter search program
ENTER
ENTER
or to move the
to resume
SEARCH
.
SCAN
Operation
to store
again
37