Talk Group Ids - Radio Shack PRO-92 Owner's Manual

20-522b.fm Page 54 Thursday, September 7, 2000 9:41 AM
B
L
9 10 11
O
C
K
0 S4 S0 S4
1 S4 S0 S0
2 S0 S0 S0
3 S0 S0 S0
4 S0 S0 S0
5 S0 S0 S0
6 S0 S4 S0
7 S0 S4 S0
6. Press for each entry. If you make a mistake,
ENTER
press and enter the correct size code.
CL
Note: The default setting of the bank is for Motorola
Type II. However, if you set Type I and you want to
return to Type II, enter
7. To confirm the input, repeat Steps 1–5 and press
. Each time you press
ENTER
the size code. If you find an error, press
begin again at Step 1.
8. Press to start scanning.
SCAN

TALK GROUP IDS

You can program up to 100 talk group IDs in each bank.
When the scanner stops on a transmission in the LTR,
Motorola, or EDACS mode, it checks to see if the ID has
been stored. In the closed mode, the scanner only stops
on the transmission and displays its text tag if you have
stored and not locked out the ID. In the open mode, the
scanner always stops on a transmission, but it displays
the ID's text tag if you have stored the ID.
54
Trunking Operation
Size Code
12 13 14 15
S0 S3 S4 S4
S0 S3 S3 S4
S0 S11 S10 S4
S0 S4 S4 S11
S0 S4 S4 S11
S0 S0 S4 S0
S0 S0 S12 S12
S4 S0 — —
at Step 5.
15
, you confirm
ENTER
CL
16
S3
S10
S10
S11
S0
S0
S12
—
and