Radio Shack PRO-92 Owner's Manual page 44

20-522b.fm Page 44 Thursday, September 7, 2000 9:41 AM
3. Press then
FUNC PRI
the frequency.
Note: This scanner cannot set a channel as the priority
channel if the channel's receive mode is
ED .
Follow these steps to program a weather channel as the
priority channel.
1. Press .
WX
2. Select the weather channel you want to program as
the priority channel.
3. Press then
FUNC PRI
the frequency.
To turn on the priority feature, press
Priority ON (or Priority WX
to a weather channel) appears for about 3 seconds, then
P appears. The scanner checks the priority channel ev-
ery 2 seconds. It stays on the channel if there is activity
(or if it detects a weather alert tone in Priority WX mode),
Pri appears and S or M
Notes:
• Priority WX is only for receiving a weather alert.
• When the scanner detects a 1050 Hz tone, Priority
WX activates and you receive a weather alert.
To turn off the priority feature, press
OFF appears and P disappears.
Notes:
• If you program a weather frequency into the priority
channel and the scanner detects a weather alert
tone on that frequency, the scanner sounds the alert
tone.
44
Special Features
. Pri appears to the right of
LTR , MOT
. Pri appears to the right of
while scanning.
PRI
if you set the priority
changes to P .
. Priority
PRI
, or