2. Introduction | Back Panel View
Control Descriptions
Item
<UV Dimmer>
or <UV>
<Strobe>
<Blackout>
Back Panel View
Back Panel Ports
Port/Item
Power On/Off
DC Power In
DMX Control Out
Page 8 of 22
Fader that controls:
· the addition of UV in all modes
Button that:
· stops strobing in all modes other than Manual mode
· activates, pauses, and deactivates the strobe function when in Manual mode
The LED indicates when strobing is activated.
This button is used in combination with <Strobe Speed>. See
Button that interrupts all DMX output from the board with an LED to indicate when the Blackout is active.
Power On/Off
DC Power In
Power on/off toggle switch
External PSU port that connects to the power source
3-pin DMX port – for connecting to the lights
Description
DMX Control Out
Function
Strobe Function
for more information.
Obey™ 6 User Manual Rev 1