Strobe Function In Manual Mode - Chauvet Obey 6 User Manual

4. Operation | Preset Mode
Strobe Function
In Manual Mode
Page 16 of 22
Activating the strobe function in Manual mode suspends color mixing. Once the Strobe function is
activated, strobing can be adjusted with <Strobe Speed>. Then, the Strobe function can be exited,
while the strobing continues, so that all the faders can return to controlling colors.
Strobing can also be stopped and restarted without changing colors.
To activate the Strobe function in Manual mode, exit it to change colors, and then return to it, do the
following:
1. Set a color with the faders.
2. Press <Strobe> once. The Strobe LED turns on.
3. Use <Strobe Speed> to set the strobe speed. The Strobe LED flashes.
4. Press <Strobe> once. Nothing changes. The strobing continues.
5. Set another color with the faders or press a Quick Color button. The color changes while the
lights strobe.
6. Press <Strobe> once. Nothing changes. The strobing in the new color continues.
7. Use <Strobe Speed> to change the strobe speed.
To stop the strobing and restart it, do the following:
1. Go into Manual mode with the strobe active
2. Press <Strobe> twice. The Strobe LED stops flashing and the strobing stops.
3. Move <Strobe Time>. The Strobe LED starts flashing and the strobing starts.
Strobing can be deactivated in two different ways:
Either:
1. Bring <Strobe Speed> all the way down.
2. Press <Strobe>. The Strobe LED turns off.
Or:
1. Press <Strobe> twice. The Strobe LED stops flashing.
2. Press <Strobe>. The Strobe LED turns off.
To exit Manual mode, press any other mode button.
Obey™ 6 User Manual Rev 1