Operation; Selecting Lights; Color Fade Mode - Chauvet Obey 6 User Manual

4. Operation | Selecting Lights
4. O
PERATION
Selecting
Lights
Color Fade
Mode
Page 12 of 22
Lights are selected by pressing one or more <FIXTURES> buttons. Pressing <FIXTURES 1>
selects any and all lights in the DMX chain that are addressed at 1. Pressing <FIXTURES 1> and
<FIXTURES 2> selects any and all lights in the DMX chain that are addressed at 1 or 7.
See DMX Addressing of Lights
Even though multiple lights can be selected by pressing one button, this manual refers to
each button as a single light.
The <FIXTURES> buttons are inclusive, so that more than one light can be selected at a time.
Pressing one button and then another will select both lights. To unselect a light press the light's
button a second time and the LED will turn off.
To select two lights, do the following:
1. Press a <FIXTURES> button. Its LED turns on.
2. Press a different <FIXTURES> button. Its LED turns on.
Both lights are selected.
To select one light and then select another, do the following:
1. Press a <FIXTURES> button. Its LED turns on.
2. Press another <FIXTURES> button. Its LED turns on.
3. Press the <FIXTURES> button from step1 again. Its LED turns off.
Only the light from step 2 is selected.
If the LED is on, the light is selected.
Color Fade mode rotates through colors in the following order: Red, Yellow, Green, UV, Blue, Violet,
Amber, and White. <Speed Time> and <Fade Time> adjust the timing of the color fade.
<Master Dimmer> adjusts the intensity of the color fade, and <Strobe Speed> strobes the color
fade.
To go into Color Fade mode, do the following:
1. Select lights by pressing <FIXTURES> buttons. The LEDs of the selected lights turn on.
2. Press <Color Fade>. The Color Fade LED turns on.
3. Use <Master Dimmer> to set the brightness level.
4. Use <Speed Time> and <Fade Time> to set the speed of the fade and the speed of the
changes between colors.
5. Use <Strobe Speed> to strobe the color fade. See
To exit Color Fade mode, press any other mode button.
·
If the lights are behaving oddly, check that <Speed Time> and <Fade Time> are half way
up. Check that <Master Dimmer> is all the way up.
·
See Tips and Tricks
and DMX Addressing Chart
for more information.
for more information.
Strobe Function for more information.
Obey™ 6 User Manual Rev 1