Product At A Glance; Safety Notes - Chauvet Obey 6 User Manual

1. Before You Begin | Product at a Glance
Product at a
Glance

Safety Notes

Page 4 of 22
Use on Dimmer
Outdoor Use
Sound-Activated
DMX
Master/Slave
These notes include important information about the mounting, use, and maintenance of this
product. Read these notes before using the product.
·
Always connect the product to a grounded circuit.
·
Make sure the power cord is not crimped or damaged.
·
Always disconnect the product from the power source before cleaning it.
·
Never disconnect the product from the power source by pulling or tugging on the cord.
·
Make sure there are no flammable materials close to the product when it is operating.
·
The product is for indoor use only! It is rated at IP20.
·
Do not expose the product to rain or moisture.
·
Make sure the voltage of the power source used for the product is within the range stated on the
label or on rear panel of the product.
·
Never connect the product to a dimmer or a rheostat.
·
Always install the product in a location with adequate ventilation, and leave at least 20 in
(50 cm) between the product and adjacent surfaces.
·
Be sure that no ventilation slots on the product's housing are blocked.
·
Do not operate the product in an ambient temperature higher than 104 °F (40 °C)
·
In the event of a serious operating problem, stop using the product immediately.
·
Never try to repair the product. Repairs carried out by untrained people can lead to damage or
malfunction.
·
If repairs are required, contact the nearest authorized technical assistance center.
See Contact Us for contact information.
·
Keep this User Manual for future reference. If the product is sold, be sure to give this manual to
the next owner.
x
Auto Program
x
Auto-Ranging Power Supply
P
Replaceable Fuse
P
User-Serviceable
x
x
P
x
x
Obey™ 6 User Manual Rev 1