Operation; Control Panel Description; Control Options; Programming - Chauvet LX GO User Manual

4. Operation

Control Panel
Description

Control Options

Programming

DMX Personality

DMX Control

DMX CAST

DMX Cast Recording
DMX Cast Playback
LX Go™ User Manual Rev. 4
Button
<MENU>
<ENTER>
<UP>
<DOWN>
You can set the LX Go™ start address in the 001~512 DMX range.
Refer to the Menu Map
level and a variable number of programming levels for each option.
• To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
• To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
• Press <MENU> repeatedly to exit to the previous main level.
This setting allows you to choose a particular DMX personality.
1. Go to the SETTINGS > PERSON level.
2. Select the desired personality (RGB, RGBW, or RGBWA).
• See the DMX Values
each personality.
• Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as shown in DMX Personality.
2. Set the starting address:
a. Go to SETTINGS > ADDRESS level.
b. Select the starting address (001~512).
In this mode, the LX Go™ can record up to 12 hours of continuous DMX programming
data from another DMX controller and play it back from the control panel, scheduled
playback mode, or IRC.
This setting allows you to record up to 12 hours of DMX programming on a single
universe.
1. Go to Edit > DMXCAST > RECORD PASSWORD level.
2. Enter the master access password as shown in Password.
3. Press <ENTER> or move channel 1 on the DMX controller to a value between
011~099, to start recording. "DMXCAST RECEIVING" will be displayed.
4. Press <ENTER> again or move channel 1 on the DMX controller to a value between
201~255, to end recording. "DMXCAST STOP" will be displayed.
1. Go to PLAY > DMXCAST > level.
2. Press <ENTER>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value in to the current function
Navigates upward through the menu list and increases the
numeric value when in a function
Navigates downward through the menu list and decreases the
numeric value when in a function
to understand the menu options. The menu map shows the main
section for the highest starting address you can select for
Operation
Function
-7-