Troubleshooting
Action
Step 7
Check for patterns on prints.
a
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging > Sharpness > select a lower
setting
Note: Make sure no scaling is being selected.
b
Resend the copy job.
Do patterns appear on prints?
Step 8
Check for missing or faded text on prints.
a
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging
b
Adjust the settings:
•
Sharpness—Increase the current setting.
•
Contrast—Increase the current setting.
c
Resend the copy job.
Do prints have missing or faded text?
Step 9
Check for washed‑out or overexposed output.
a
From the Copy screen, navigate to:
Advanced Options > Advanced Imaging
b
Adjust the settings of the following:
•
Background Removal—Reduce the current setting.
•
Shadow Detail—Reduce the current setting.
c
Resend the copy job.
Do pages show washed‑out or overexposed prints?
Scanner unit does not close
Action
Check if there are no obstructions between the scanner unit and the
printer.
a
Lift the scanner unit.
b
Remove any obstruction that keeps the scanner unit open.
c
Lower the scanner unit.
Did the scanner unit close properly?
Yes
No
Go to step 8.
The problem is solved.
Go to step 9.
The problem is solved.
Contact
customer
The problem is solved.
support.
Yes
No
The problem is solved. Contact
support.
355
customer