Repeating Defects Appear On Prints - Lexmark MX810 Series User Manual

Troubleshooting

Repeating defects appear on prints

Action
Step 1
a
Replace the imaging unit if the distance between the defects is equal
to any of the following:
•
47.8 mm (1.88 in.)
•
96.8 mm (3.81 in.)
• 28.5 mm (1.12 in.)
b
Resend the print job.
Do repeating defects still appear on prints?
Step 2
a
Replace the fuser if the distance between the defects is equal to either
of the following:
•
94.25 mm (3.71 in.)
• 95.2 mm (3.75 in.)
b
Resend the print job.
Do repeating defects still appear on prints?
Yes No
Go to step 2. The problem is solved.
Contact customer The problem is solved.
support.
345