Lexmark MX810 Series User Manual page 200

Understanding the printer menus
Use
Error Recovery
Auto Reboot
Reboot when idle
Reboot always
Reboot never
Error Recovery
Max Auto Reboots
1‑20
Print Recovery
Auto Continue
Disabled
5–255
Print Recovery
Jam Recovery
On
Off
Auto
Print Recovery
Jam Assist
On
Off
Print Recovery
Page Protect
Off
On
To
Automatically reboot the printer.
Note: "Reboot when idle" is the factory default setting.
Determine the number of automatic reboots the printer can
perform.
Note: 5 is the factory default setting.
Let the printer automatically continue printing from certain offline
situations when not resolved within the specified time period.
Note: Disabled is the factory default setting.
Specify whether the printer reprints jammed pages.
Notes:
• Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Set the printer to automatically check for jammed paper.
Note: On is the factory default setting.
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
•
Off is the factory default setting. This prints a partial page
when there is not enough memory to print the whole page.
•
On sets the printer to process the whole page so that the
entire page prints.
200