Lexmark MX810 Series User Manual page 393

Index
Fax server 'To Format' not set up.
Contact system
administrator. 303
Fax Station Name not set up.
Contact system
administrator. 303
Fax Station Number not set up.
Contact system
administrator. 303
Imaging unit low [84.xy] 303
Imaging unit nearly low
[84.xy] 303
Imaging unit very low, [x]
estimated pages remain
[84.xy] 303
Incompatible output bin [x]
[59] 303
Incompatible tray [x] [59] 304
Incorrect paper size, open [paper
source] [34] 304
Insert hole punch box 304
Insert staple cartridge 304
Insert Tray [x] 304
Install bin [x] 304
Install duplex 305
Install Tray [x] 305
Insufficient memory for Flash
Memory Defragment operation
[37] 305
Insufficient memory to collate job
[37] 305
Insufficient memory to support
Resource Save feature [35] 306
Insufficient memory, some Held
Jobs were deleted [37] 306
Insufficient memory, some held
jobs will not be restored
[37] 306
Load [paper source] with [custom
string] [paper orientation] 306
Load [paper source] with [custom
type name [paper
orientation] 306
Load [paper source] with [paper
size] [paper orientation] 306
Load [paper source] with [paper
type] [paper size] [paper
orientation] 307
Load Manual Feeder with [custom
string] [paper orientation] 307
Load Manual Feeder with [custom
type name] [paper
orientation] 307
Load Manual Feeder with [paper
size] [paper orientation] 307
Load manual feeder with [paper
type] [paper size] [paper
orientation] 307
Load staples 308
Maintenance kit low [80.xy] 308
Maintenance kit nearly low
[80.xy] 308
Maintenance kit very low, [x]
estimated pages remain
[80.xy] 308
Memory full [38] 308
Memory full, cannot print
faxes 308
Memory full, cannot send
faxes 309
Network [x] software error
[54] 309
No analog phone line connected
to modem, fax is disabled. 309
Non‑Lexmark [supply type], see
User's Guide [33.xy] 309
Not enough free space in flash
memory for resources [52] 309
Paper changes needed 310
Parallel port [x] disabled [56] 310
Printer had to restart. Last job
may be incomplete. 310
Reattach bin [x] 310
Reattach bins [x] – [y] 311
Reinstall missing or unresponsive
cartridge [31.xy] 311
Reinstall missing or unresponsive
imaging unit [31.xy] 311
Remove defective disk [61] 311
Remove packaging material, [area
name] 312
Remove paper from [linked set bin
name] 312
Remove paper from all bins 312
Remove paper from bin [x] 312
Remove paper from standard
output bin 312
Replace all originals if restarting
job. 312
Replace cartridge, 0 estimated
pages remain [88.xy] 312
Replace cartridge, printer region
mismatch [42.xy] 312
Replace imaging unit, 0 estimated
pages remain [84.xy] 313
Replace jammed originals if
restarting job. 313
Replace last scanned page and
jammed originals if restarting
job. 313
Replace maintenance kit, 0
estimated pages remain
[80.xy] 314
Replace missing fuser [80.xx] 314
Replace roller kit [81.xx] 314
Replace separator pad 314
Replace unsupported cartridge
[32.xy] 314
Replace unsupported imaging unit
[32.xy] 314
Replace wiper 314
Restore held jobs? 315
Scan document too long 315
Scanner automatic feeder cover
open 315
Scanner disabled by admin
[840.01] 315
Scanner disabled. Contact system
administrator if problem persists.
[840.02] 315
Scanner jam, remove all originals
from the scanner [2yy.xx] 315
Scanner jam, remove jammed
originals from the scanner
[2yy.xx] 315
Scanner maintenance required
soon, use ADF Kit [80] 315
Serial option [x] error [54] 315
Serial port [x] disabled [56] 316
Some held jobs were not
restored 316
Standard network software error
[54] 316
Standard USB port disabled
[56] 316
Supply needed to complete
job 316
Too many bins attached [58] 316
Too many disks installed [58] 317
Too many flash options installed
[58] 317
Too many trays attached [58] 317
393