Print Job Takes Longer Than Expected; Repeating Defects Appear On Prints - Lexmark CS510 User Manual

Troubleshooting

Print job takes longer than expected

Action
Step 1
Change the environmental settings of the printer.
a
From the printer control panel, navigate to:
Settings > General Settings
b
Select Eco‑Mode or Quiet Mode, and then select Off.
Note: Disabling Eco-Mode or Quiet Mode may increase the
consumption of energy or supplies, or both.
Did the job print?
Step 2
Reduce the number and size of fonts, the number and complexity
of images, and the number of pages in the print job, and then
resend the job
Did the job print?
Step 3
a
Remove held jobs stored in the printer memory.
b
Resend the print job.
Did the job print?
Step 4
a
Disable the Page Protect feature.
From the printer control panel, navigate to:
Settings > General Settings > Print Recovery > Page Protect
> Off
b
Resend the print job.
Did the job print?
Step 5
Install additional printer memory, and then resend the print job.
Did the job print?

Repeating defects appear on prints

)
)
)
Yes No
The problem is Go to step 2.
solved.
The problem is Go to step 3.
solved.
The problem is Go to step 4.
solved.
The problem is Go to step 5.
solved.
The problem is Contact
solved. support.
185
customer