Zoom And Focus Adjustment; Auto Setup Function - Sanyo PLC-XU106 Owner's Manual

Basic Operation

Zoom and Focus Adjustment

Rotate the Zoom Lever to zoom in and out.
Rotate the Focus Ring to adjust the focus of the image.

Auto Setup Function

Auto setup function is provided to automatically execute the
setting of Auto setup (includes Input search, Auto PC adj.
and Auto keystone functions) in the Setting Menu by just
pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control. Refer to page 47
for the setting of the Auto setup function.
Note:
• Auto Keystone corrects vertical distortion only; it does not
correct horizontal distortion.
• Auto Keystone cannot work when Ceiling feature is set to
On in the Setting Menu. (p.52)
• Perfect correction of the image distortion cannot be ensured
with the Auto setup function. If the distortion cannot be
corrected properly by pressing the AUTO SETUP or AUTO
SET button, adjust manually by pressing the KEYSTONE
button on the top control or on the remote control or
selecting Keystone in the Setting Menu. (p.48)
• Fine sync, Total dots, Horizontal and Vertical position
of some computers cannot be fully adjusted with the Auto
PC adjustment function. When the image is not provided
properly with this operation, manual adjustments are
required. (pp.33-34)
24
Zoom Lever
Focus Ring
Top Control
AUTO SETUP button
Remote Control
AUTO SET button