Image Mode Selection - Sanyo PLC-XU106 Owner's Manual

Video Input

Image Mode Selection

Direct Operation
Select the desired image mode from among Dynamic,
Standard, Cinema, Blackboard (Green), Colorboard,
Image 1, Image 2, Image 3, and Image 4 by pressing the
IMAGE button on the remote control.
Menu Operation
1
Press the MENU button to display the On-Screen Menu.
Use the Point
then press the Point
2
Use the Point
and then press the SELECT button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture mode preset on the projector.
Cinema
Picture mode adjusted with fine tone.
Blackboard (Green)
For the image projected on a blackboard.
This mode help enhance the image projected on a
blackboard. This is mainly effective on a green colored
board, not truly effective on a black colored board.
Colorboard
Press the Point button at Colorboard, and then use the
Point buttons to switch the desired item and then press
the SELECT button.
At the time of simple projection on the colored wall, you can
get the close color image to the color image projected on a
white screen by selecting the similar color to the wall color
from the preset four colors.
Image 1-4
For viewing with the user preset image mode in the Image
adjust Menu (see pages 43-44). This Image memory is
provided in each computer, component, S-video and Video
input source.
42
buttons to select Image select and
or the SELECT button.
buttons to select the desired item
Remote Control
IMAGE button
Image select Menu
IMAGE button
Dynamic
Standard
Cinema
Blackboard (Green)
Colorboard
Image 1
Image 2
Image 3
Image 4