Input Source Selection (Computer 2 Rgb) - Sanyo PLC-XU106 Owner's Manual

Computer Input
Input Source Selection (Computer 2: RGB)
Direct Operation
Choose Computer 2 (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
to Input and then press the Point
button.
2
then press the SELECT button.
3
When Computer 2 is selected, analog RGB input
source will be selected directly.
Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.47).
30
COMPUTER 2 button
Computer 2(RGB)
buttons, move the highlight
or the SELECT
buttons to select Computer 2 and
Top Control
INPUT button
Input Menu
Computer 1(RGB) /
(Component) / (Scart)
Computer 2(RGB)
Video
S-video
Auto
Auto