Computer System Selection - Sanyo PLC-XU106 Owner's Manual

Computer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC
adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format
and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are
shown on pages 72.)
One of the following messages may appear when:
The projector cannot recognize the connected
Auto
signal conforming to the provided PC Systems.
Auto is displayed on the System Menu box and
the Auto PC adjustment function works to display
proper images. If the image is not projected
properly, a manual adjustment is required.
(pp.33-34)
There is no signal input from the computer.
-----
Check the connection between your computer
and the projector. (See "Troubleshooting" on
page 66.)
The preset system is manually adjusted in the
Mode 1
PC adjust Menu. The adjusted data can be
stored in Mode 1-5. (pp.33-34)
PC Systems provided in this projector is chosen.
SVGA 1
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point buttons to select System and then
press the Point or the SELECT button.
Use the Point buttons to select the desired system
3
and then press the SELECT button.
buttons to select Input and
or the SELECT button.
PC System Menu
The PC System Menu Selected
system is displayed.
PC System Menu
Systems in this
dialog box
can be selected.
Computer Input
Customized Mode
set in the
PC adjust Menu
(pp.33-34).
31