Installation; Positioning The Projector; Adjustable Feet - Sanyo PLC-XU106 Owner's Manual

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
A B 9 1

Adjustable Feet

Projection angle can be adjusted up to 8.9 degrees with the
adjustable feet.
Lift the front of the projector and press the feet lock latches
on both side of the projector.
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.
Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control
or the menu operation (pp.24-25,47-48).
14
23.6' (7.2 m)
15.7' (4.8 m)
11.8' (3.6 m)
7.9' (2.4 m)
3.0' (0.9 m)
100"
40"
64"
Screen Size
40"
(W x H) mm
813 x 610
4 : 3 aspect ratio
4.9' (1.5m)
Zoom (min)
Zoom (max)
3.0' (0.9m)
37.4' (11.4 m)
200"
150"
126"
95"
100" 150"
2032 x 1524 3048 x 2286
12.5' (3.8 m) 18.7' (5.7 m)
7.9' (2.4 m) 11.8' (3.6 m)
Adjustable Feet
300"
Max. Zoom
300"
Min. Zoom
189"
A
B
200" 300"
4064 x 3048 6096 x 4572
24.9' (7.6 m) 37.4'(11.4m)
15.7' (4.8 m) 23.6' (7.2 m)
Feet Lock Latches