Remote Control - Sanyo PLC-XU106 Owner's Manual

Part Names and Functions

Remote Control

Note:
To ensure safe operation, please
observe the following precautions:
– Do not bend, drop, or expose the
remote control to moisture or heat.
– For cleaning, use a soft dry cloth. Do
not apply benzene, thinner, spray, or
any chemical material.
12
ON/STAND-BY button
Turn the projector on or off. (pp.19-21)
AUTO SET button
Execute the setting of Auto setup (includes Input search
function, Auto PC adj. function and Auto Keystone function).
(pp.24, 47)
COMPUTER 1/2 buttons
Select the COMPUTER 1 or COMPUTER 2 input source.
(pp.29-30, 40)
VIDEO button
Select the VIDEO input source. (p.39)
S-VIDEO button
Select the S-VIDEO input source. (p.39)
Point
buttons
– Select an item or adjust the value in the On-Screen Menu.
(p.22)
– Pan the image in the Digital zoom +/- mode. (p.38)
SCREEN button
Select a screen mode. (pp.28, 37-38, 45)
MENU button
Open or close the On-Screen Menu. (p.22)
FREEZE button
Freeze the picture on the screen. (p.27)
NO SHOW button
Temporarily turn off the image on the screen. (p.28)
D.ZOOM buttons
Zoom in and out the images. (pp.27, 38)
Adjust the volume level. (p.26)
MUTE button
Mute the sound. (p.26)
IMAGE button
Select the image mode. (pp.28, 35, 42)
P-TIMER button
Operate the P-timer function. (p.28)
LAMP button
Select a lamp mode. (pp.27, 54)
INFO. button
Operate the information function. (p.59)
KEYSTONE button
Correct Standard (for Vertical/Horizontal adjustment) or Corner
keystone distortion (pp.25, 48).
SELECT button
– Execute the selected item. (p.22)
– Expand or compress the image in Digital zoom mode. (p.38)
COMPONENT button
Select the COMPONENT input source. (p.40)