Image Adjustment - Sanyo PLC-XU106 Owner's Manual

Computer Input

Image Adjustment

1 Press the MENU button to display the On-Screen
Menu. Use the Point
adjust and then press the Point
button.
2 Use the Point
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point button to decrease the contrast; press the
Point button to increase the contrast (from 0 to 63).
Brightness
Press the Point button to decrease the brightness; press
the Point button to increase the brightness (from 0 to 63).
Color temp.
Use the Point buttons to select the desired Color temp.
level (XLow, Low, Mid, or High).
White balance (Red)
Press the Point button to lighten red tone; press the Point
button to deepen red tone (from 0 to 63).
White balance (Green)
Press the Point
Point button to deepen green tone (from 0 to 63).
White balance (Blue)
Press the Point button to lighten blue tone; press the
Point button to deepen blue tone (from 0 to 63).
Sharpness
Press the Point button to decrease the sharpness of the
image; press the Point
of the image (from 0 to 15).
Gamma
Use the Point
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
Yes. All adjustments will return to their previous figures.
36
buttons to select Image
or the SELECT
buttons select the desired item
button to lighten green tone; press the
button to increase the sharpness
buttons to adjust the gamma value to
Image adjust Menu
buttons to
Note:
• When White balance Red, Green or Blue is
adjusted, Color temp. will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp. will
change to Blackboard or Colorboard.
Selected Image mode
Use the Point
buttons to adjust the
setting value.