Launching And Quitting Pj Network Manager; Name Of Status Window - Sanyo PLC-XU106 Owner's Manual

Chapter 3 Basic Operation

Launching and quitting PJ Network Manager

To launch PJ Network Manager, take one of the following.
- Select "PJ Network Manager" from the menu "Start" - "All programs".
- Double click a management file*

Name of status window

Tool bar
Target
Status bar
* With double clicking the target name, the web browser is launching and
displays login window of the target.( p.31)
Items Description
Menu..................................... Executes a command with menu selection
Tool bar ............................... Executes a command assigned to a button.
Target ................................... Network equipment for monitoring.
Status bar........................... Indicates the status of PJ Network Manager and explaining the command selected
with cursor.
Status list............................ Indicates the status of targets monitoring.
When some errors are detected, the target name, icon and error items are indicated
with red.
Status column ................ Column of status list.
Polling times indication......... Indicates the times of polling during the monitoring.
Event indication............ Indicates the event (ALERT, TRAP, SYSERR) when the event happened.
*1 The file in which the Monitor target information and event log information are stored. Refer to item
"Storing the management file" ( p.28) for further details.
8
1 .
Menu
Status column
Status list
Polling times indication
Event indication