TRENDnet TV-IP311PI User Manual page 49

TV-IP311PI User's Guide
Enable Tamper Check this box to enable tamper detection. Click Save
Detection: to save the settings.
Draw Area: Click Draw Area button to start drawing. Click and drag
on the area you want to set up the tamper detection.
You can setup only one area for tamper detection.
Click Stop Drawing to stop drawing motion detection
areas. The gray block represent the detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
© Copyright 2014 TRENDnet. All rights reserved.
Arming Schedule
Edit: Click Edit to define when you want the tamper
detection works.
1� Select the day of the week you wan to edit the
schedule.
2� Set the time period you want to enable tamper
detection. (Default is 0-24 hours, all day).
3� Click Copy to Week if you want the same daily
schedule everyday. Or, you can select other day of
the week and click Copy to copy the schedule of
the day to other days�
4� Select another day of the week by clicking on its
tab to set the next schedule. Click OK when you
finished your settings.
Notification
Send Email: Check this box to send e-mail notification when
detects tampering�
Click Save to save the changes�
Event Settings
46