Maintenance - TRENDnet TV-IP311PI User Manual

TV-IP311PI User's Guide

Maintenance

You can do the camera system maintenance on this page�
Reboot
Reboot: Click this button to reboot this camera.
Reset
Reset: Reset all camera parameters, except the IP parameters
and user information.
Default: Load complete factory default to the camera.
© Copyright 2014 TRENDnet. All rights reserved.
Import Config. File
Config. File: To load previously saved configurations, click Browse
to find the configuration file and then click Import�
Status: Shows the status in loading configuration file.
Click Save to save the changes�
Export Config. File
Export: Click Export to download configuration file. The file
will be downloaded to the Download folder by default.
Remote Upgrade
Firmware: Click Browse to find the latest firmware and then click
Upgrade*�
Status: Shows the status in firmware upgrade.
* TRENDnet may periodically release firmware upgrades
that might add features or fix problems associated with
your TRENDnet model and version. To find out if there is a
firmware upgrade available for your device, please check
your TRENDnet model and version using the link.
http://www.trendnet.com/downloads/
1� If a firmware upgrade is available, download the
firmware to your computer.
2� Unzip the file to a folder on your computer.
3� Read the firmware upgrade instruction for specific
version update information.
4� Log into the TV-IP311PI
5� Getting to this Maintenance page to upgrade
firmware.
System Configuration
30