TRENDnet TV-IP311PI User Manual page 47

TV-IP311PI User's Guide
Draw Area: Click Draw Area button to start drawing. Click and drag
on the area you want to set up the motion detection.
You can draw up to 8 different areas. Click Stop
Drawing to stop drawing motion detection areas.
The red grids represent the detection area.
Sensitivity: Move the slider to adjust detection sensitivity.
Clear All: Click this button to clear all the set up areas.
© Copyright 2014 TRENDnet. All rights reserved.
Arming Schedule
Edit: Click Edit to define when you want the motion
detection works.
1� Select day of the week you wan to edit the
schedule.
2� Set the time period you want to enable motion
detection. (Default is 0-24 hours, all day).
3� Click Copy to Week if you want the same daily
schedule everyday. Or, you can select other day of
the week and click Copy to copy the schedule of
the day to other days�
4� Select another day of the week by clicking on
its tab to set next schedule. Click OK when you
finished your setting.
Event Settings
44