Avaya 4625SW User Manual page 78

Telephone Management and Troubleshooting
Ringing (Incoming) Tones
1 Ring --------
2 Rings ------- -------
3 Rings ------ ------ ------
Half Ring (ring-ping) ---
Feedback (Handset) Tones
Busy --- --- ---
Call Waiting Ringback Tone ---_
Confirmation -- -- --
Coverage -
Dial ---------
Intercept/Time-out -_-_-_-
Recall Dial - - - -----------
Reorder -- -- -- -- -- --
Ringback ---- ---- ---- ----
78 4625SW IP Telephone Release 2.5 User Guide
Meaning
Call from another extension.
Call from outside or the System Administrator.
Priority call from another extension, or from an
Automatic Callback call you placed.
A call is being redirected from your phone to
another because Send All Calls or Call
Forwarding All Calls is active.
Meaning
Low-pitched, rapid tone (repeated 60 times
per minute), signifying the number dialed is
in use.
A ringback tone with lower-pitched signal at
the end. This indicates the extension called
is busy and the called party was given a call
waiting tone.
Three short tone bursts. This indicates a
feature activation or cancellation was
accepted.
One short tone burst. This indicates your
call will be sent to another extension for a
covering user to answer.
Continuous tone indicating dialing can start.
Alternating high and low tone indicating a
dialing error, denial of a requested service,
or failure to dial within a preset interval
(usually 10 seconds) after lifting the handset
or dialing the previous digit.
Three shorts tone bursts followed by a
steady dial tone indicate a feature request
was accepted and dialing can start.
Fast busy tone repeated every half-second
indicate all phone trunk lines are busy.
Low-pitched tone repeated 15 times a
minute indicates the number dialed is
ringing.