Striding Belt Not Centered; Striding Belt Misalignment; Lifepulse Heart Rate Does Not Respond; No Chest Strap Detected - Life Fitness 97Te Service Manual

Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
TROUBLESHOOTING GUIDE
SYMPTOM

Striding belt not centered.

Striding belt misalignment,

but properly tensioned.
Lifepulse Heart Rate
System does not respond
or improper heart rate
reading or "Reading Heart
Rate" appears in the
message center for more
than 2 minutes without
giving heart rate reading.
Display reads a continuous
heart rate reading when
hands are removed.

No Chest Strap detected.

PROBABLE CAUSE
Striding belt tension or tracking needs
to be adjusted.
Improper walking/running.
Dirty handlebar sensors.
User running over 4.5 mph (7.5kph).
User may have an unusual heart
condition.
Loose connections at display console
and handlebar.
Faulty heart rate sensors.
Faulty display console PCB.
Harness wires pinched at handlebar or
handrail.
Chest strap sensors not making good
contact with body of user.
User is out of monitoring range.
Loose connection at receiver.
Faulty chest strap.
1-9
CORRECTIVE ACTION
See How To...Adjust And Tension The
Striding Belt.
Notify Club Manager.
Wipe sensors with a clean soft cloth.
Verify operation. Refer to Diagnostics
in Section 2.
For accurate heart rate reading, user
must slow down to less than 4.5 mph
(7.5kph).
Have different people grasp sensors to
detect any variance.
Secure connections at display console
and handlebar.
Replace handlebar sensors. See How
To... Replace Heart Rate Kit.
Replace display console PCB. See
How To... Replace Console PCB.
If the wires are damaged, replace
damaged cables. See How
To...Replace Handlebar Assembly.
Adjust chest strap and moisten
sensors to make better contact with
skin.
Move within 3 ft (1 meter) of receiver
Check connection. See "How
To"...Replace Telemetry Receiver.
Replace chest strap.