On/Off Switch; Line Cord - Life Fitness 97Te Service Manual

Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Line Cord
Special Service Tools Required: NONE
1. Turn the unit power OFF at the switch, and then
unplug the Line Cord at the wall outlet.
2. Remove the Access Cover on the right side of
the Frame, and then tilt the unit over on its right
side.
3. Remove the Clamp Screw securing the Line
Cord.
4. Remove the Line Cord and discard.
5. Install the new Line Cord and secure in place
with the Clamp.
6. Upright the unit and reinstall the Access Cover.

Line Cord

Clamp
BLACK Wire
To Bottom
Right of
ON/OFF
Switch
Receptacle
GREEN Wire
Ground
INTERNAL WIRING
3-35
Clamp
Screw
WHITE Wire
To Bottom
Left of
ON/OFF
Switch