Assembling/Adjusting/Using The Handcycle Rack - Invacare xlt User Manual

10 OPTIONS

10.6 Assembling/Adjusting/Using the Handcycle Rack

Assembling the Handcycle Rack
1. Position the receiver with the bracket facing up.
2. Position the rear wheel bar with the wheel brackets facing up.
3. Remove the two large mounting bolts and locknuts from the receiver and set aside.
4. Remove the two small mounting bolts and locknuts from the receiver bracket and set aside.
5. Secure the wheel tray to the receiver with the two large mounting bolts and locknuts.
6. Using two small mounting bolts and locknuts, secure the receiver bracket to the wheel tray.
7. Remove the two mounting bolts and locknuts from the rear wheel bar and set aside.
8. Using two mounting bolts and locknuts, secure the rear wheel bar to the wheel tray.
9. Install the receiver onto the trailer hitch of the vehicle, according to the vehicle manufacturer's instructions.
Adjusting the Handcycle Rack

To properly secure the handcycle, the wheel tray bracket should be adjusted to sit against the front wheel.
Wheel Tray Bracket
1. Remove the four mounting bolts and locknuts securing the wheel tray bracket to the wheel tray.
2. Position the wheel tray bracket in the desired position.
3. Secure the wheel tray bracket to the wheel tray with the four mounting bolts and locknuts.
Invacare® Top End® Recreation Handcycles
88
Part No 1171891