Options; Installing Safety Lights - Invacare xlt User Manual

10 OPTIONS

10 Options
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise injury or
damage may occur.

10.1 Installing Safety Lights

WARNING
Operation of the handcycle is subject to all traffic rules and regulations (this may include the use of a safety lights and reflectors for
dusk/night riding).
Batteries
1. Remove the lens cover.
2. Insert the AAA batteries with correct polarity (+ or -).
3. Reinstall lens cover.
Mounting the Safety Light
1. Remove the set screw from the clamp on the safety light.
2. Install the safety light.
A. Rear safety light: Pull the back cushion off of the back frame.
Position the clamp onto the rear seat post. Install the set screw
into the clamp and tighten securely.
B. Front safety light: Position the clamp onto the side frame. Install
the set screw into the clamp and tighten securely.
Operating the Safety Light
1. Press GREY button to turn safety light on/off.
2. Remove lens cover and slide switch back and forth for pulse or
constant mode.
Invacare® Top End® Recreation Handcycles
Rear Safety Light
84
Front Safety Light
Part No 1171891