Adjusting/Replacing Seven Speed Shifter; Installing/Adjusting Seven Speed Hub Chain - Invacare xlt User Manual

9.8

Adjusting/Replacing Seven Speed Shifter

It is recommended that you take your handcycle to a qualified technician for any shifter adjustment.
Handcycles with seven speed shifters are equipped with SHIMANO hubs. If equipped with a SHIMANO hub, it MUST be serviced and adjusted by a
qualified technician.

QUALIFIED TECHNICIAN ONLY - Contact Invacare for complete Shimano hub instructions.
9.9

Installing/Adjusting Seven Speed Hub Chain

Installing
WARNING
Idler MUST be adjusted to ensure proper chain tension. If proper tension is not present, chain may disengage from the chainring. If the
chain is noisy when at proper tension, loosen slightly. After the chain is assembled, start in first gear and on straghtaway.
1. Spread the chain out flat and run it over the bottom chain tensioner upwards to the hand crank sprocket assembly.
2. Position chain over the hand crank sprocket assembly.

It may be necessary to turn the hand crank in a clockwise motion to position the chain on the sprocket.
3. Run the chain over the top chain tensioner.
4. Position the chain around the wheel sprocket and back up towards the bottom chain tensioner.
5. Place chain over the top of the bottom chain tensioner.
6. Attach the chain together using the master link (with clip) provided.
Part No 1171891
67
Invacare® Top End® Recreation Handcycles
9 SERVICE PROCEDURES