Modifying The Splash Screen; Bitmap Layout - ADTRAN IP 700 Series Administrator's Manual

Ip phone

Hide thumbs Also See for IP 700 Series:

Table of Contents

Configuring Common Features

Modifying the Splash Screen

You can customize the IP phone's splash screen presented during boot up by downloading a 216 x 336

pixel, 16-color grey-scale bitmap file to the parameter IconPixmap. Most graphics programs can be used

to modify and save the file.

When defining the splash screen, always begin by using the provided default .bmp file. This makes it

easier to create accurate files. Use only the four colors (black, white, light grey, and dark grey) in the color

palette of the default file.

The bitmap is built in blocks of 16 x 16 pixels. There are 14 x 21 blocks in the IP phone bitmap. The right

most block is only half the width of a normal block or 8 pixels. Each row is one block in height. The

bitmap begins the drawing at the top left corner of each block. Both the IP 706 and IP 712 phone models

use eight rows for the splash screen.

IP 700 Series Phone Administrator Guide

61200770E1-31C

Table of Contents