Setting The Realm; Table 4. Realm Settings - ADTRAN IP 700 Series Administrator's Manual

Ip phone

Hide thumbs Also See for IP 700 Series:

Table of Contents

Configuring Common Features

#Label that will appear next to the buttons that use this line.

Reg.1.Label x2000

#Enable call logging for this line (may not want for SCAs).

Reg.1.Logging true

#Only required for SCAs to set the subscription interval.

Reg.1.LineSeize 30

#True since we will assign this line to more than 1 line button (MCA).

Reg.1.Multiple true

#General PBX type line.

Reg.1.Realm gp

#Link it to the previous Servers we defined where it will Register.

Reg.1.Servers 1

#Not a shared line.

Reg.1.Shared false

#Request-URI for calls forwarded to voicemail.

Reg.1.Voicemail 106

Setting the Realm

The realm specifies the type of phone system in which the lines are being configured. This setting provides

the dial plan to be used. Table 4 lists the available settings for Reg.1.Realm defined in the MAC address-

based configuration file for each phone. Refer to Appendix B on page 83 for more information on setting

up the dial plan parameters.

Value

General External (GE)

Private External (PE)

Description

Used for general non-PBX-type outside lines. Lines of

this type use the DialPlanExternal dial plan.

Used for private (few users) non-PBX-type outside lines.

Lines of this type use the DialPlanExternal dial plan.

IP 700 Series Phone Administrator Guide

61200770E1-31C

Table of Contents