Using the Administrator's Web Interface
To remove the configured values (shown in parentheses after the setting name), select Clear Manual
Settings.
To change the current configured values, follow these steps:
1. Enter a new value in the corresponding field.
2. Select Save Manual Settings.
Line Key Settings
From the Button Settings menu, you can configure the line keys as busy lamp field/direct station select
(BLF/DSS), speed, do not disturb (DND), or as a new line appearance. Select the location of the line key
first, then configure the type, label, number (if required), and realm (if required). This is a quick way to
create speed dial instances.
To remove the configured values (shown in parentheses after the setting name), select Clear Manual
Settings.
To change the current configured values, follow these steps:
1. Enter a new value in the corresponding field.
2. Select Save Manual Settings.
30
Figure 11. Button Settings Menu
Copyright © 2009 ADTRAN, Inc.
IP 700 Series Phone Administrator Guide
61200770E1-31C