If the embedded touch screen does not appear to be powering up (black screen and no fan running), follow the steps
below for proper troubleshooting:
1. Check if the 2 pin connector (JP10) on the interface board (PN: 718-5166) has a solid connection (Fig. 1 and 2). Re-
seat it and check if the plastic body that is attached to the board bonded with it to ensure contact. The interface
boards function is to pass the signal/power coming in through to the inside components of the computer.
STAR TRAC FITNESS
Manual Computer Reset
Embedded Touch Screen
Fig. 1
Troubleshooting
1 of 4
Fig. 2
637-1382 Rev: A