Lifecycle Recumbent Bikes LC95R, LC91R, LC85R, R9, R7, 95Ri, 93Ri, 90R, and 95Re
How To... Replace the Clutch Assembly
Special Service Tools: NONE
1. Remove the right shroud. See
"How To..." in this section.
2. Remove the main drive belt.
See "How To..." in this section.
3. Remove the snap ring from the
intermediate shaft.
4. Remove the washers and clutch
assembly. Discard the clutch
assembly.
5. Install the new clutch and its
parts in reverse order. Make
sure to install the step side
going into the frame.
6. Install main drive belt.
7. Install shrouds and then pedals.
Washer
Washer
10
Main
Drive
Belt
Clutch
Assembly
Snap
Ring