Life Fitness LC9500R Service Manual page 108

Lifecycle Recumbent Bikes LC95R, LC91R, LC85R, R9, R7, 95Ri, 93Ri, 90R, and 95Re
How To... Replace the Display Console and Console Support
Special Service Tools: NONE
1. Remove four mounting screws from the back of
the console at the console support.
2. Lift the console up just enough to disconnect the
10-pin main wiring connector, and if equipped,
the 4-pin heart rate cable.
3. Remove the console from the console support.
4. Remove four frame post bolts securing the
console support.
5. Lift out the console support from the frame post
be careful of the wiring.
6. Install console and console support in reverse
order of removal.
9V Battery
Battery
Cover
Console Support
Frame Post
Bolts
32
Console
4-Pin
Heart Rate Cable
10-Pin Connector
Main Wiring Cable
Console
Mounting
Screws
Frame Post