Inverter Board - Life Fitness LC9500R Service Manual

Lifecycle Recumbent Bikes LC95R, LC91R, LC85R, R9, R7, 95Ri, 93Ri, 90R, and 95Re
How To... Replace the Inverter Board
Special Service Tools Required: NONE
CAUTION! BEFORE REPLACING CIRCUIT
BOARD(S), GROUND YOURSELF TO EARTH
GROUND USING AN ANTI-STATIC GROUND
STRAP.
1. Remove console from unit. Refer to Display
Console and Accessory Tray Removal.
2. Remove seven screws from the Back Cover
and lift the Back Cover off.
3. Disconnect the Pink/White Power Wire
Connectors (2) from the top of the
Inverter Board, and the 4-Yellow Wires
Connector, which receives Power from
the PC to the Inverter, at the bottom of
the Inverter Board.
4. Remove two Phillips screws securing the
Inverter Board to the back of the LCD
Touch Screen and lift it out.
5.
Install new Inverter Board in reverse
order.
Back Cover
Back Cover
Screws (7)
Inverter
Board
Pink/White
Power Wire
Connectors(2)
Screws
41
LCD Touch
Screen
Yellow Wires(4)
Connector
(Power from PC
to Inverter Board)