Life Fitness LC9500R Service Manual page 105

Lifecycle Recumbent Bikes LC95R, LC91R, LC85R, R9, R7, 95Ri, 93Ri, 90R, and 95Re
How To... Replace the Reed Switch and Cable
Special Service Tools: NONE
1. Remove the side shrouds. See "How To..." in this section.
2. Disconnect the reed switch connector from the power control board (PCB).
3. To replace just the reed switch cable assembly, remove two screws securing the reed switch it to the bracket.
4. To replace both the reed switch cable assembly and bracket, remove the screw securing the bracket to the
frame.
5. Cut any cable ties, and remove the reed switch cable assembly.
6. Install new reed switch cable assembly in reverse order.
Reed Switch
Connector
Reed
Switch
Bracket
29
Reed
Switch
Cable
Reed
Switch