QoS Output Scheduling
QoS can be customized by changing the output scheduling used for the hardware classes of service in the Switch. As with
any changes to QoS implementation, careful consideration should be given to how network traffic in lower priority classes
of service is affected. Changes in scheduling may result in unacceptable levels of packet loss or significant transmission
delay. If you choose to customize this setting, it is important to monitor network performance, especially during peak
demand, as bottlenecks can quickly develop if the QoS settings are not suitable. In the QoS folder, click QoS Output
Scheduling, to view the screen shown below.
You may assign the following values to the QoS classes to set the scheduling.
Parameter
Max. Packets
Click Apply to implement changes made.
DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual
Figure 8- 6. QoS Output Scheduling Configuration window
Description
Specifies the maximum number of packets the above specified hardware priority
class of service will be allowed to transmit before allowing the next lowest priority
queue to transmit its packets. A value between 1 and 55 can be specified.
88