The following fields can then be set in either the Add or Modify 802.1Q Static VLANs menus:
Parameter
VID (VLAN ID)
VLAN Name
Port Settings
Tag
None
Egress
Click Apply to implement changes made. Click the
VLANs window.
DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual
Figure 7- 6. 802.1Q Static VLANs - Modify
Description
Allows the entry of a VLAN ID in the Add dialog box, or displays the VLAN ID of an
existing VLAN in the Modify dialog box. VLANs can be identified by either the VID or the
VLAN name.
Allows the entry of a name for the new VLAN in the Add dialog box, or for editing the
VLAN name in the Modify dialog box.
Allows an individual port to be specified as member of a VLAN.
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will
designate the port as Tagged.
Allows an individual port to be specified as a non-VLAN member.
Select this to specify the port as a static member of the VLAN. Egress member ports are
ports that will be transmitting traffic for the VLAN. These ports can be either tagged or
untagged.
Show All Static VLAN Entries
71
link to return to the 802.1Q Static