D-Link DES-3010F Manual page 58

The following parameters can set:
Parameter
Group Name
Read View Name
Write View Name
Notify View Name
Security Model
Security Level
To implement your new settings, click Apply. To return to the SNMP Group Table, click the
Table Entries link.
DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual
Figure 6- 22. SNMP Group Table Configuration – Add window
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new
SNMP group of SNMP users.
This name is used to specify the SNMP group created can request SNMP mes-
sages.
Specify a SNMP group name for users that are allowed SNMP write privileges to
the Switch's SNMP agent.
Specify a SNMP group name for users that can receive SNMP trap messages
generated by the Switch's SNMP agent.
SNMPv1 - Specifies that SNMP version 1 will be used.
SNMPv2 - Specifies that SNMP version 2c will be used. The SNMPv2 supports both
centralized and
improvements in the Structure of Management Information (SMI) and adds some
security features.
SNMPv3 - Specifies that the SNMP version 3 will be used. SNMPv3 provides
secure access to devices through a combination of authentication and encrypting
packets over the network.
The Security Level settings only apply to SNMPv3.
NoAuthNoPriv - Specifies that there will be no authorization and no
•
encryption of packets sent between the Switch and a remote SNMP
manager.
AuthNoPriv - Specifies that authorization will be required, but there will be
•
no encryption of packets sent between the Switch and a remote SNMP
manager.
AuthPriv - Specifies that authorization will be required, and that packets
•
sent between the Switch and a remote SNMP manger will be encrypted.
distributed network
57
management strategies.
Show All SNMP Group
It includes