D-Link DES-3010F Manual page 133

EapLogOffAuthenticating
ReauthsAuthenticated
EapStartsAuthenticated
EapLogOffAuthenticated
Responses
AccessChallenges
OtherReqToSupp
ResponsesFromSupplicant
AuthSuccesses
AuthFails
DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual
being received from the Supplicant.
Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message
being received from the Supplicant.
Counts the number of times that the state machine transitions from
AUTHENTICATED to CONNECTING, as a result of a reauthentication request
(reAuthenticate = TRUE).
Counts the number of times that the state machine transitions from
AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message
being received from the Supplicant.
Counts the number of times that the state machine transitions from
AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff
message being received from the Supplicant.
Counts the number of times that the state machine sends an initial Access-
Request packet to the Authentication server (i.e., executes sendRespToServer
on entry to the RESPONSE state). Indicates that the Authenticator attempted
communication with the Authentication Server.
Counts the number of times that the state machine receives an initial Access-
Challenge packet from the Authentication server (i.e., aReq becomes TRUE,
causing exit from the RESPONSE state). Indicates that the Authentication
Server has communication with the Authenticator.
Counts the number of times that the state machine sends an EAP-Request
packet (other than an Identity, Notification, Failure, or Success message) to the
Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that
the Authenticator chose an EAP-method.
Counts the number of times that the state machine receives a response from
the Supplicant to an initial EAP-Request, and the response is something other
than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to
transition from REQUEST to RESPONSE, and the response is not an EAP-
NAK). Indicates that the Supplicant can respond to the Authenticator's chosen
EAP-method.
Counts the number of times that the state machine receives an Accept message
from the Authentication Server (i.e., aSuccess becomes TRUE, causing a
transition from RESPONSE to SUCCESS). Indicates that the Supplicant has
successfully authenticated to the Authentication Server.
Counts the number of times that the state machine receives a Reject message
from the Authentication Server (i.e., aFail becomes TRUE, causing a transition
from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated
to the Authentication Server.
132