This window displays the Authenticator State for individual ports on a selected device. A polling interval between 1 and
60 seconds can be set using the drop-down menu at the top of the window and clicking OK.
The information on this window is described as follows:
Parameter
MAC Address
Auth PAE State
Backend State
Port Status
DES-3010F/G / DES-3018 / DES-3026 Fast Ethernet Switch Manual
Figure 10- 26. Authenticator State window – MAC-Based 802.1x
Description
Displays the Authenticator MAC address.
The Authenticator PAE State value can be: Initialize, Disconnected, Connecting,
Authenticating, Authenticated, Aborting, Held, Force_Auth or Force_Unauth.
The Backend Authentication State can be Request, Response, Success, Fail,
Timeout, Idle or Initialize.
Controlled Port Status can be Authorized or Unauthorized.
137