Lifecycle 3500, 4500, 5500 Series Exercise Bikes
How To...REMOVE AND REPLACE THE PEDALS
Tools Required: 5/8" open-end wrench
Step 1
To remove the LEFT PEDAL (small hole-side of HOUSING) place a 5/8" open-end wrench on the PEDAL BOLT.
Turn the wrench clockwise and remove the PEDAL.
Step 2
To remove the RIGHT PEDAL (sprocket side) place a 5/8" open end wrench on the PEDAL BOLT. Turn the wrench
counter-clockwise and remove the PEDAL.
Step 3
Guide the new PEDALS on the CRANK ARMS. To tighten the PEDALS, place a 5/8" open-end wrench on to the
PEDAL BOLT. Turn the wrench counter-clockwise for the LEFT PEDAL and clockwise for the RIGHT PEDAL.
Tighten parts to the following specifications:
Right and Left Pedal
10-10 ft. lbs.
13