How To Remove The Housing On The Lifecycle 5500 Aerobic Iv-Ainer - Life Fitness LIFECYCLE 5500 Operation Manual

HOW TO REMOVE THE HOUSIHG ON THE
LIFECYCLE 5500 AEROBIC TRAINER
Step 1
Remove the left-side PEDAL (the user's left side; small hole-side of the housing) by
turning the PEDAL NUT clockwise m\h a 5/8" open-end wrench, then remove the
right-side PEDAL by turning the PEDAL NUT counter-clockwise.
Step 2
Raise the COLLAR from the base of the HANDLEBAR POST by pinching the sides
of the COLLAR and lifting upward. Remove the two SCREWS securing the right and
left HOUSINGS to the FRAME.
Step 3
Remove the eight screws (total) from the right side of the shroud at the locations
shown in the illustration below.
COLLAR
NOTE: INTERNAL SCREWS (2) MUST BE
REMOVED BEFORE LEFT SIDE OF SHROUD
CAN BE REMOVED FROM FRAME
HOUSING
CRANK ARM
How to remove the housing of the Lifecycle 5500