Adjustable Foot Cap - Life Fitness Lifecycle 3500 Series Service Manual

Lifecycle 3500, 4500, 5500 Series Exercise Bikes
How To...REMOVE AND REPLACE THE ADJUSTABLE FOOT CAP
Tools Required: Rubber mallet
Step 1
Turn the Lifecycle trainer on to it's side.
Step 2
Remove the worn FOOT CAP from the STABILIZER TUBE
by pulling and twisting on the FOOT CAP in either direction.
Step 3
Place the new FOOT CAP over the STABILIZER TUBE
end. Use a RUBBER MALLET to tap it in place.
Step 4
After placing the Lifecycle Exercise Bikes in the intended location for use, check the stability of the bike. If the bike
is not level, turn the FOOT CAP in either direction until the rocking motion is diminished. If one end of the Lifecycle
is not touching the floor, rotate the FOOT CAP so that the large end is touching the surface. If one end of the
Lifecycle is too high, rotate the FOOT CAP so that the small end is touching the surface.
NOTE: ONLY ONE FOOT CAP NEEDS TO BE TURNED.
15