Liquid Cooling Solution; Removing The Liquid Cooling Solution - HP Z800 Maintenance And Service Manual

Liquid cooling solution

The following section describes how to remove and install a processor liquid cooling solution (LCS).
NOTE:
The LCS is not eligible for Customer Self-Repair. Call HP Support for further instructions before
attempting to remove or repair this system.

Removing the liquid cooling solution

1. Disconnect power from the system
access panel
2. Remove the expansion card support (see
3. Remove the airflow guide with the attached liquid cooling air duct (see
guide on page
Figure 5-102
ENWW
(Predisassembly procedures on page
(Removing the side access panel on page
80) as shown in the following figure.
Removing the airflow guide
79).
Removing the expansion card support on page
Removing and installing components
77) and remove the side
82).
Removing the airflow
177