Disassembly Order - HP Z800 Maintenance And Service Manual

Disassembly order

For convenience, disassembly procedures should be followed in a particular order. Use the following
table to determine the sequence in which to remove major workstation components.
Table 5-3
Predisassembly procedures on page 77
Cable lock (optional) on page 78
76 Chapter 5 Replacing components
Workstation component disassembly order
Side access panel on page 79
Airflow guide on page 80
Expansion card support on page 82
Right side panel on page 86
Power supply on page 86
Speaker on page 87
Side access panel sensor (optional) on page 88
Power connections on page 90
Front bezel on page 91
Front panel I/O cable assembly on page 92
Power switch cable assembly on page 96
Optical bay filler tray on page 97
Optical disk drive on page 100
Slot load optical disk drive (optional) on page 106
Hard disk drive on page 114
Expansion card guide/front fan holder on page 141
System fans on page 146
Installing a second front system fan on page 149
Memory fans on page 155
Memory on page 158
Expansion card slot identification on page 165
Choosing an expansion card slot on page 168
CPU heatsink on page 199
PCIe card on page 169
PCI card on page 174
CPU on page 203
ENWW